ET-P08

1S LiPo Protection Board

Name: 1S LiPo Protection Board
Brand: ElectroTrical
SKU: ET-P08
Price: 9.00 AED
Availability: OutOfStock

Over-charge, over-discharge and short protection, 4 A

AED 9.00

Out of stock

✓ TestedEvery board is checked before it ships

🚚 Fast shippingUAE 1–3 days · GCC & worldwide

💬 Engineer supportQuestions answered by the designers

Download datasheet (PDF)

Overview Key features Specifications Performance Pinout

Overview

Over-charge, over-discharge and short protection, 4 A

The ET-P08 is built around the Over-charge ~4.3V, over-discharge ~2.4V, over-current/short (DW01+ thresholds), 0V-cell charge per IC variant.

Designed in Dubai by ElectroTrical — the full schematic, BOM and design notes are published below.

Good for

Protecting bare 18650 and LiPo cells
DIY battery packs
Adding safety to kits

Key features

What makes it different

Protection

Over-charge ~4.3V, over-discharge ~2.4V, over-current/short (DW01+ thresholds), 0V-cell charge per IC variant

Current

~3A continuous, trips ~3–4A (set by FS8205A Rds(on))

Use

Adds protection to unprotected 18650/LiPo cells; charger and load both connect to P+/P−

Open documentation

Schematic, BOM and layout notes published for every board.

Breadboard friendly

Standard 2.54 mm pitch and M2.5 mounting holes.

Specifications

Technical specifications

Device
Protection	Over-charge ~4.3V, over-discharge ~2.4V, over-current/short (DW01+ thresholds), 0V-cell charge per IC variant
Current	~3A continuous, trips ~3–4A (set by FS8205A Rds(on))
Use	Adds protection to unprotected 18650/LiPo cells; charger and load both connect to P+/P−

Board
Size	25.4 × 12.7 mm
Mounting	2 mounting holes (M2.5) on a 25.4 × 12.7 mm strip
Connectors	2-pin 2.54 mm header · JST PH 2P R/A SMD (LiPo) — Cell (B+ / B−) · JST PH 2P R/A SMD (LiPo) — Pack output (P+ / P−)
Main IC	DW01+G (LCSC C14213)
Revision	Rev A

Performance

Protection thresholds

Cell voltage thresholdsDW01-class protection IC, typical thresholds. The cell is disconnected outside 2.4–4.3 V.

Over-discharge cut-off2.4 V

Nominal3.7 V

Fully charged4.2 V

Over-charge cut-off4.3 V

Pinout

Pin map and connections

Pin	Name	Type	Function
1	`BAT+`	Power	P+ = B+
2	`P−`	Ground	Protected negative (NOT the cell's −)

Mechanical

Dimensions and what's in the box

Board 25.4 × 12.7 mm with M2.5 holes — Top view · 25.4 × 12.7 mm

In the box

1 × ET-P08 1S LiPo Protection Board (assembled)
1 × 2-pin 2.54 mm male header, unsoldered

Getting started

Wire the header: BAT+, P−

Compare

Which battery board?

	1S LiPo Protection Board (this board)This board	ET-P01 MCP73831 USB-C LiPo Charger	ET-P02 BQ24074 Solar / USB-C Charger	ET-P09 LiPo Power Bank Module
What it does	Over-charge, over-discharge and short protection, 4 A	500 mA / 100 mA single-cell LiPo charger, USB-C	Solar and USB-C LiPo charger with power path	USB-C charger plus 5 V 1 A boost
Interface	—	USB-C 5V (Rd 5.1k → any USB-C source gives 5V);…	USB-C 5V and 2-pin terminal 5–10V (6V solar…	—
Best for	Protecting bare 18650 and LiPo cells	Charging LiPo cells for wearables	Solar-powered sensor nodes	Portable 5 V projects
Price	9 AED	22 AED	49 AED	49 AED

Downloads

Documents and design files

PDFET-P08 schematicRev A LCSCDW01+G datasheet and stockC14213

STEP3D modelComing soon

Need a custom version of this board?

Different connector, size or sensor? We design and build custom variants.

Get a design quote Talk to an engineer