ET-S14

PMS5003 Particulate Sensor Carrier

Name: PMS5003 Particulate Sensor Carrier
Brand: ElectroTrical
SKU: ET-S14
Price: 25.00 AED
Availability: OutOfStock

PM1.0 / PM2.5 / PM10 carrier with level-shifted UART

AED 25.00

Out of stock

✓ TestedEvery board is checked before it ships

🚚 Fast shippingUAE 1–3 days · GCC & worldwide

💬 Engineer supportQuestions answered by the designers

Download datasheet (PDF)

Overview Key features Specifications Performance Pinout

Overview

PM1.0 / PM2.5 / PM10 carrier with level-shifted UART

The ET-S14 is built around the Plantower PMS5003 laser particle counter (bought separately) — PM1.0/2.5/10, particle counts. It connects over UART 9600 8N1 + SET (sleep) + RESET and is powered from 5V only (fan); logic 3.3V or 5V via JP2.

Designed in Dubai by ElectroTrical — the full schematic, BOM and design notes are published below.

Good for

Dust and smoke monitoring
Air-purifier feedback
Outdoor air-quality stations

Key features

What makes it different

Sensor

Plantower PMS5003 laser particle counter (bought separately): PM1.0/2.5/10, particle counts

Interface

UART 9600 8N1 + SET (sleep) + RESET

Supply

5V only (fan); logic 3.3V or 5V via JP2

Libraries

Adafruit_PM25AQI / CircuitPython, ESPHome pmsx003

Open documentation

Schematic, BOM and layout notes published for every board.

Breadboard friendly

Standard 2.54 mm pitch and M2.5 mounting holes.

Specifications

Technical specifications

Device
Sensor	Plantower PMS5003 laser particle counter (bought separately): PM1.0/2.5/10, particle counts
Interface	UART 9600 8N1 + SET (sleep) + RESET
Supply	5V only (fan); logic 3.3V or 5V via JP2

Board
Size	38.1 × 25.4 mm
Mounting	4 × M2.5 holes, 2.54 mm from each corner
Connectors	7-pin 2.54 mm header
Revision	Rev B

Software
Libraries	Adafruit_PM25AQI / CircuitPython, ESPHome `pmsx003`

Solder jumpers
JP1 (default Closed)	Cut to turn off the LED
JP2 (default A–C (3V3))	Cut and bridge B–C for 5V-logic hosts

Performance

Particle size bins

Particle-count size thresholdsPlantower PMS5003 data protocol: particle counts per 0.1 L for each size threshold, plus PM1.0, PM2.5 and PM10 mass.

> 0.3 µm0.3 µm

> 0.5 µm0.5 µm

> 1.0 µm1 µm

> 2.5 µm2.5 µm

> 5.0 µm5 µm

> 10 µm10 µm

Pinout

Pin map and connections

Pin	Name	Type	Function
1	`5V`	Power	4.5–5.5V, ~100mA
2	`GND`	Ground	Ground
3	`TX`	UART	Sensor data → host RX
4	`RX`	UART	Host TX → sensor
5	`SET`	Control	Low = sleep (fan off)
6	`RST`	Control	Low = reset
7	`3V3`	Power	Reference output

I²C pull-ups (10 kΩ) are on the board; cut JP2 to remove them.

Mechanical

Dimensions and what's in the box

Board 38.1 × 25.4 mm with M2.5 holes — Top view · 38.1 × 25.4 mm

In the box

1 × ET-S14 PMS5003 Particulate Sensor Carrier (assembled)
1 × 7-pin 2.54 mm male header, unsoldered

Getting started

Wire the header: 5V, GND, TX, RX, SET, RST
Libraries: Adafruit_PM25AQI / CircuitPython, ESPHome pmsx003

Compare

Which air-quality sensor?

	PMS5003 Particulate Sensor Carrier (this board)This board	ET-S02 SCD41 True CO₂ Sensor	ET-S13 SGP41 VOC & NOx Sensor	ET-S12 BME688 Gas & Environmental Sensor
What it does	PM1.0 / PM2.5 / PM10 carrier with level-shifted UART	Photoacoustic NDIR CO₂ plus temperature and humidity	Sensirion VOC and NOx index gas sensor	VOC gas plus temperature, humidity and pressure
Interface	UART 9600 8N1 + SET (sleep) + RESET	I²C, fixed 0x62	I²C, fixed 0x59	I²C 0x77 / 0x76 (JP3)
Best for	Dust and smoke monitoring	Indoor air-quality monitors	Air purifier control	Indoor air-quality nodes
Price	25 AED	159 AED	49 AED	59 AED

Downloads

Documents and design files

PDFET-S14 schematicRev B

STEP3D modelComing soon

Need a custom version of this board?

Different connector, size or sensor? We design and build custom variants.

Get a design quote Talk to an engineer