ET-P13

TP4056 USB-C Charger + Protection

Name: TP4056 USB-C Charger + Protection
Brand: ElectroTrical
SKU: ET-P13
Price: 22.00 AED
Availability: OutOfStock

1 A LiPo charger with cell protection and USB-C

AED 22.00

Out of stock

✓ TestedEvery board is checked before it ships

🚚 Fast shippingUAE 1–3 days · GCC & worldwide

💬 Engineer supportQuestions answered by the designers

Download datasheet (PDF)

Overview Key features Specifications Performance Pinout

Overview

1 A LiPo charger with cell protection and USB-C

The ET-P13 is built around the TP4056 — 1A CC/CV to 4.2V ±1%, trickle precharge, auto-recharge, thermal regulation.

Designed in Dubai by ElectroTrical — the full schematic, BOM and design notes are published below.

Good for

Rechargeable 18650 projects
Power banks and torches
Battery packs for robots

Key features

What makes it different

Charger

TP4056: 1A CC/CV to 4.2V ±1%, trickle precharge, auto-recharge, thermal regulation

Protection

DW01 + FS8205A: over-charge, over-discharge (~2.4V), over-current/short on the output

Input

USB-C 5V (CC 5.1k — works with C-to-C cables)

Output

OUT+/OUT− screw terminal and pads (protected); load can stay connected while charging

Open documentation

Schematic, BOM and layout notes published for every board.

Breadboard friendly

Standard 2.54 mm pitch and M2.5 mounting holes.

Specifications

Technical specifications

Device
Charger	TP4056: 1A CC/CV to 4.2V ±1%, trickle precharge, auto-recharge, thermal regulation
Protection	DW01 + FS8205A: over-charge, over-discharge (~2.4V), over-current/short on the output
Input	USB-C 5V (CC 5.1k — works with C-to-C cables)
Output	OUT+/OUT− screw terminal and pads (protected); load can stay connected while charging

Board
Size	25.4 × 20.3 mm
Mounting	2 mounting holes (M2.5)
Connectors	2-pin 2.54 mm header · USB-C 16P receptacle (USB 2.0) — USB-C 5V in · JST PH 2P R/A SMD (LiPo) — Cell B+ / B− · Screw terminal 2P 5.0mm 17A (THT) — Protected output OUT+ / OUT−
Main IC	TP4056-42-ESOP8 (LCSC C16581)
Revision	Rev A

Performance

Charge time

Time to full charge at 1 ATP4056 1 A CC plus CV taper (approx.).

1000 mAh1.3 h

2000 mAh2.5 h

3000 mAh (18650)3.6 h

Pinout

Pin map and connections

Pin	Name	Type	Function
1	`BAT+`	Power	Protected + (= cell +)
2	`OUT-`	Signal	Protected − (NOT the cell −)

Mechanical

Dimensions and what's in the box

Board 25.4 × 20.3 mm with M2.5 holes — Top view · 25.4 × 20.3 mm

In the box

1 × ET-P13 TP4056 USB-C Charger + Protection (assembled)
1 × 2-pin 2.54 mm male header, unsoldered

Getting started

Wire the header: BAT+, OUT-

Compare

Which battery charger?

	TP4056 USB-C Charger + Protection (this board)This board	ET-P01 MCP73831 USB-C LiPo Charger	ET-P02 BQ24074 Solar / USB-C Charger
What it does	1 A LiPo charger with cell protection and USB-C	500 mA / 100 mA single-cell LiPo charger, USB-C	Solar and USB-C LiPo charger with power path
Interface	USB-C 5V (CC 5.1k — works with C-to-C cables)	USB-C 5V (Rd 5.1k → any USB-C source gives 5V);…	USB-C 5V and 2-pin terminal 5–10V (6V solar…
Best for	Rechargeable 18650 projects	Charging LiPo cells for wearables	Solar-powered sensor nodes
Price	22 AED	22 AED	49 AED

Downloads

Documents and design files

PDFET-P13 schematicRev A LCSCTP4056-42-ESOP8 datasheet and stockC16581

STEP3D modelComing soon

Need a custom version of this board?

Different connector, size or sensor? We design and build custom variants.

Get a design quote Talk to an engineer